PROCESSING
PLASMA CUTTING
Plasma cutting is the most flexible technology used for obtaining any kind of shape.

The plasma jet melts the perimeter of the item at an ultra-high temperature making a 3/4 mm cut (depending on the thickness). This technology guarantees a clean and good quality cut with reduced tapering. Plates thinner than 20 mm are cut underwater, which guarantees a reduced thermal alteration of the surface. Thicker plates are cut semi-submerged or in air.

All pieces are deburred after cutting and straightened if necessary.


Taglio al plasma
Plasma cut acc. to UNI EN ISO 9013 – 542
Taglio al plasma
Plasma cut acc. to UNI EN ISO 9013 – 542
Machines in ITALYClose

1 plasma

Maximum dimensions:3000 x 12000 mm - Maximum thickness: 50 mm

1 plasma

Maximum dimensions: 3000 x 8000 mm - Maximum thickness: 50 mm

1 plasma

Maximum dimensions: 3000 x 9000 mm - Maximum thickness: 60 mm

1 plasma

Maximum dimensions: 3000 x 6000 mm - Maximum thickness: 150 mm

1 hydraulic press

Maximum dimensions 3000 x 4000 mm - Power: 200 MT

1 hydraulic press

Maximum dimensions: 2400 x 3450 mm - Power: 400 MT

Machines in FRANCEClose

1 plasma HD

Maximum dimensions: 2500 x 12000 mm - Maximum thickness: 35 mm

1 plasma

Maximum dimensions: 3000 x 6000 mm - Maximum thickness: 150 mm

1 hydraulic press

Maximum dimensions: 2000 x 2000 mm - Power: 200 MT

Machines in POLANDClose

1 plasma

Maximum dimensions: 3000 x 8500 mm - Maximum thickness: 60 mm

1 plasma

Maximum dimensions: 3000 x 8500 mm - Maximum thickness: 150 mm

1 hydraulic press

Maximum dimensions: 3000 x 4000 mm - Power: 200 MT
DOWNLOAD / NEWS
OMC 2015
TRADE FAIR in Ravenna - ITALY
on 25th to the 27th of March 2015
Halle 3 stand A38
Alihankinta
SUBCONTRACTING TRADE FAIR a Tampere - FINLANDIA
on 16th to the 18th of September 2014
Tampere Exhibition and Sports Centre
QUALITY
QUALITY